Videx MTTS-EXIT Silver surface mount touch to exit switch

The MTTS-EXIT is a slim, aluminium surface mount request to exit device with a touch sensitive plate and halo illumination to indicate the status of the device (open = green or closed = red) Powered from 12-24Vac or dc with a dry contact change over relay output (COM, NO & NC) the device can be triggered for 3, 5 or 10 seconds or set into a latching (toggle) mode using the internal dip-switches. The IP rated exit switch can be installed in both internal and external environments. In standby the unit is illuminated red to indicate the exit is secured (closed). Touching the plate changes the illumination to green and along with a reassurance beep the internal relay will operate to open the exit for the programmed time. The exit button can be used with an access control system (Portal Plus controller for example) or 3rd party access control or can be wired directly to a lock as a standalone exit device. Features Touch sensitive request to exit button Designed for internal or external use Resin potted moulded aluminium housing, IP65 rated Audible and visual feedback Programmable relay time or latching mode Low current consumption (65mA max.) It has an adjustable timed relay output which can also be set to latch if required. As such it can be used with the Portal Plus access control, a 3rd party access control or connected directly to a lock as a standalone unit. Both audible and visual indication is a standard feature to indicate when the button has been activated.