Nice RBS600BDKCE + Comelit GSM 4G with keypad

RBS600BDKCE A new and improved design for the NICE Robus 600kg weight capacity sliding gate motor supplied with a pair of photocells, 2 x 4 button transmitters, flashing light and built in receiver. *Gear/drive rack is sold separately.  This quiet and reliable sliding gate motor is suitable for light residential gates and comes with the MCU1 control panel included. Comelit 4G Intercom is designed to work with gates, barriers and door entry. Suitable for residential properties or small office. The intercom has 1 call button and built in keypad. Utilizing 2G, 3G & 4G networks where available calls are received on standard telephones or mobile phones. Install a SIM card from any network in the panel, then using the easy to use APP, or via the keypad just program the numbers required. When the call button is pressed the recipient can talk to the visitor and let them in by pressing # Avoid missing callers, the additional numbers can be programmed to forward the call on to other devices / phone numbers – never miss an important delivery again! Robuskit 1 User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of 7 pairs of photocells from the MoonBus series using two wires only. Self closing: can be programmed to self close. Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor. Advanced: Robus 600 & 1000 are equipped with a temperature sensor which adapts the motor power to the climatic conditions and at the same time the thermal cut-out. A master/slave selection automatically synchronises 2 motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels. Safe: acceleration and deceleration can be adjusted at the beginning and end of each ope