Nice Home RC200 receiver

The NiceHome RC200 receiver allows you to control your automated gate and garage door systems via remote control, it also has the potential for lighting and sprinkler control. The NiceHome RC200 receiver allows you to control your automated gate and garage door systems, it also has the potential for lighting and sprinkler control. The RC200 radio receiver, used in combination with the ECCO5 transmitters, is suitable for the remote control of single-phase equipment powered by the mains voltage, with up to 500W power. The possible commands are On/Off, “Man Present”, Timer 1 and Timer 2. The radio receiver operates at a frequency of 433.92 MHz and can memorise up to 30 ECCO5. The RC200 radio receiver does not require mounting, it can be positioned directly in the dedicated compartment. Technical Specifications Type: radio receiver for control of general electrical equipmentTechnology: reception and decoding of the radio signals emitted by the transmitters activation of the output relays only in case of correspondence with a previously memorized code, correctly synchronized with the variability sequenceRemote Controls: ECCO5 & STX100 transmittersCoding: 64 bit rolling code (18 billion billion combinations)Transmitter capacity: up to 30, if memorised in Mode 1Reception frequency: 433.92 MHzReceiver sensitivity: better than 0.6μV (with direct coupling)Transmitter range: estimated at 50-100m (this distance may vary in the presence of obstacles or electromagnetic disturbances)Power supply: 230Vac (+10-15%) 50HzMaximum power output: 500W / 400VAAbsorption when idle: < 0.7W (typical at 230 Vac)Activation time: approx. 300msDeactivation time: approx. 300msTimer resolution and precision: 1s/±2%Operating ambient temperature: -10°C … +55°CProtection class: IP55 (enclosure undamaged) with round cables having a diameter of 6.5 to 8.5 mmDimensions / weight: 98 x 26 x 20mm / 45 g