MOTUL 111034 MOTOCOOL FACTORYLINE -35°C Racing RTU Coolant - 1 Litre

High-Performance motorbike cooling liquid, ready to useAnti-corrosion and anti-freeze, protection -35 °C / -31 °FOAT Technology – Organic Acid TechnologyNitrite free / Amine free / Phosphate free / Borate free / Silicate free Application: MOTUL MOTOCOOL FACTORY LINE is a racing cooling liquid, ready to use, based on monoethyleneglycol, using organic anti-corrosion additives (OAT – Organic Acid Technology) to provide an outstanding protection to aluminium/magnesium alloys used by bike manufacturers on new engines design. Key Benefits: Optimal protection for cooling system from freezing and metallic parts from corrosion. Specific anti-corrosion agents provide the best protection efficiency on aluminium/magnesium alloys – according to a dynamic corrosion test performed on a bike radiator, MOTOCOOL FACTORY LINE divides by 3 the corrosion rate compared to a common organic coolant. Provides an excellent thermal exchange which improves engine cooling efficiency and prevents from boiling. This specific organic OAT technology provides anti-corrosion properties that remain while being at high temperature and ageing. Low corrosion inhibitors consumption allows extended drain intervals. Water pump protection, avoids cavitation. Seals, rubber pipes and plastic parts friendly. Contains a bitterness agent to prevent from drinking: coolants and antifreezes have a sweet taste but are harmful. Recommendations: Ready to use, do not add any water. Drain intervals: Refer to the manufacturers' recommendation. Do not mix with non-organic products. This product should not be used to protect drinking water systems against freezing. Properties: Colour Visual Red Density at 20°C (68°F) ASTM D4052 1.072 Freezing point ASTM D1177 -31.0 °F / -35.0 °C pH ASTM D1287 8.5 Alkalinity reserve ASTM D1121 2.9 mg KOH/g Boiling point 136.0 °C / 277.0 °F