FlipFix Plasterboard Access Panels - Standard Lock Fire Rating - Non-Fire Rated / 550x550mm

FlipFix Plasterboard Access Panels - Non Fire Rated Beaded Frame - Standard Lock The FlipFix plasterboard access panel is designed to fit into the structural membrane of a joint-less plasterboard ceiling/wall system. The panels are manufactured with a beaded frame and a flush beaded face plasterboard door with a standard budget lock. The unique fitting device called FlipFix allows installation without any additional wood, screws or glue. We advise tape and jointing prior to a wet finish being applied. Constructed from Zintec steel, with a fully demountable plasterboard door and 56mm deep frame with fixing holes. The door is fitted with a screw pin hinge and is lockable witha standard budget lock. These panels are powder coated with RAL9010 30% gloss. Sizes Available: 150 x 150mm Structural opening (199 x 199mm Including Frame) 200 x 200mm Structural opening (248 x 248mm Including Frame) 300 x 300mm Structural opening (348 x 348mm Including Frame) 350 x 350mm Structural opening (399 x 399mm Including Frame) 450 x 450mm Structural opening (498 x 498mm Including Frame) 550 x 550mm Structural opening (598 x 598mm Including Frame) 600 x 300mm Structural opening (648 x 347mm Including Frame) 600 x 600mm Structural opening (648 x 648mm Including Frame) Features and benefits: Suitable for Walls and Ceilings Removes all additional material Costs E.g. wood, screws and glue saves up to 80% of the time taken to fit a standard Access Panel.