Brickwork Profile Printed 50.8 x 50.8mm x 1.6mm thick - 2250mm long

Use: Light and strong aluminium box section for use with Dori blocks and clamps. Printed on one face with 75mm gauge - remaining 3 faces left unprinted to allow for your own markings to be used. Note that the gauge is 75mm between lines and not necessarily from the last line to the end of the profile (gauge will be altered if cap is removed). Capped at both ends to prevent mortar ingress Material: Aluminium Printed using durable ink, which has withstood months of daily use in our trials with good results. Its as durable as printing on metal can be, but like with any printed metal surface, if its scratched down to the raw aluminium then it will come off. Note: Profiles are prone to having light scratches and blemishes due to the nature of aluminium and manufacturing processes. This in no way affects the performance of the profiles once set up. Weight: 1500mm = 1.21kg 1950mm = 1.66kg 2250mm = 1.91kg Profiles conform to BS EN 755-9:2001 Note that the gauge is 75mm between lines and not necessarily from the last line to the end of the profile (gauge will be altered if cap is removed). For this reason we recommend laying to the first line, not from the end of the profile.