ABLE V2 12Y002 24v EVO2 Control panel and enclosure

ABLE V2 24v Digital control unit with enclosure for swing 24V gate motors. PREVIOUSLY KNOWN AS V2 12A042- CITY2  CX EVO2 is provided with a display that, not only makes programming simple, but also allows a continuous monitoring of the input statuses; in addition, thanks to a menu structure, the working schedule and the operation logic can be set easily. Power supply protected from short circuits within the controller, on the motors and on the connected accessories  Adjustment of the power by partialising the current  Detecting obstacles by monitoring the current on the gate motors (using a current sensing probe) Automatic learning of the operation time and positions. Tests for safety devices (photocells, safety ribbons and mosfet) before each opening. Deactivation of safety inputs through the configuration menu: no jumper is required for terminals concerning safety devices that have not been installed, yet. You will only need to disable this function from its relevant menu. The device can operate without mains power, by using the optional battery back up pack (code 16Y016). Low voltage output that can be used for a signal light or a 24 V FX Flash flashing light. Auxiliary relay with programmable logic for courtesy light, flashing light or other use. Automatic shutdown of all peripherals when the control unit is not operating the gate, to keep the power absorbed in stand-by below 500 mW. Compliant with new standby ecodesign regulation EU 2023/826